Most developers spend hours picking the right paver color. Then they pick a pattern in five minutes. That’s backwards.

The pattern is what people see. Color is secondary. Get the pattern wrong and the whole space feels off, no matter how expensive the material is.

Brick paver patterns that create a timeless look share one thing: they work with the geometry of the space, not against it. This article breaks down the top five patterns, when to use each one, and what drives up cost.

The Basics of Brick Paver Layout

Before picking a pattern, you need to know two things.

First, not all patterns work on all shapes. A herringbone looks great in a long rectangular path. It looks cluttered in a small, irregular courtyard.

Second, cut pieces cost money. Some patterns require a lot of cuts at the edges. Others don’t. That difference shows up in labor hours.

Pavers are typically laid on a compacted aggregate base with a sand setting bed. The base depth varies by load. Foot traffic needs less. Driveways need more. The pattern sits on top of this system. The base doesn’t change based on pattern, but the installation time does.

Brick Paver Patterns That Create a Timeless Look

Running Bond

This is the most common pattern. Each row offsets by half a brick. It’s the same layout used in standard brick walls.

Running bond works on almost any surface. Paths, patios, driveways. It’s simple to install, which keeps labor costs reasonable.

The visual effect is directional. It pulls the eye forward or across, depending on orientation. Use it to make a narrow space feel longer.

Herringbone

Herringbone is the strongest pattern structurally. The interlocking 45-degree or 90-degree angles distribute load across more contact points.

That’s why it’s the go-to for driveways and high-traffic areas. The pattern resists shifting over time better than most others.

Visually, it reads as active and detailed. It holds attention without feeling busy. A 45-degree herringbone on a diagonal to the house creates a sense of movement toward the entry.

Install time is higher. Cuts are frequent, especially at borders. Budget accordingly.

Basketweave

Two pavers laid horizontally, two laid vertically, repeating. It creates a woven texture that reads as classic and residential.

Basketweave suits patios and low-traffic areas well. It’s not the best choice for driveways because it lacks the interlocking strength of herringbone.

The look is soft. It pairs well with traditional architecture. If the building style is formal or colonial, basketweave fits without conflict.

Pinwheel

Four pavers arranged around a single center paver. The result is a square repeat with a lot of visual interest.

This pattern works best as an accent, not a field pattern across a large area. Use it in a courtyard center, around a feature, or as a border inset.

Full pinwheel across a large driveway gets visually noisy fast. Restraint here pays off.

Stacked Bond

All joints align in both directions. Rows stack perfectly on top of each other.

Stacked bond is the most modern-looking option on this list. It reads as clean and geometric. It suits contemporary and minimalist architecture well.

One warning: stacked bond is structurally weaker than running bond or herringbone. The aligned joints create continuous lines through the surface. Under shifting soil or heavy load, those lines crack first.

Use it on patios and decorative walks. Avoid it on driveways unless the base is very well prepared.

How Pattern Choice Affects Project Cost

Pattern complexity drives labor cost more than material cost.

Running bond is the cheapest to install. Fewer cuts, predictable layout.

Picking the Right Pattern for the Space

Match the pattern to the use case first. Then match it to the architecture.

Driveways: Herringbone at 45 or 90 degrees. The structural performance justifies the cost.

Pool decks and patios: Running bond or basketweave. Both drain well and hold up under foot traffic without the premium install cost.

Entry walks: Running bond oriented toward the door pulls visitors forward. Herringbone at 45 degrees adds formality.

Accent areas: Pinwheel. Keep it contained.

Modern architecture: Stacked bond on patios and decorative areas. Avoid on high-load surfaces.

Scale matters too. On large surfaces, a complex pattern can feel overwhelming. Simple patterns read better at scale. Complex patterns work well in smaller, defined areas where the detail has room to register.

Frequently Asked Questions

What brick paver pattern lasts the longest?

Herringbone is the most durable pattern for high-traffic surfaces. The interlocking angle distributes load across more pavers, reducing shifting and cracking over time. For driveways, it’s the standard recommendation among professional installers.

Which paver pattern is easiest to install?

Running bond is the simplest. It requires fewer cuts and follows a predictable layout. It’s the best starting point for residential patios and walkways where labor cost is a concern.

Can you mix paver patterns in one project?

Yes. A common approach is using running bond for the main field and adding a herringbone or pinwheel border. The key is using a soldier course (a single row of pavers laid perpendicular) as a transition between patterns.

Do paver patterns affect drainage?

The pattern itself doesn’t change drainage significantly. Joint width and base preparation matter more. Wider joints allow more water infiltration. Permeable paver systems use open graded bases specifically for stormwater management.

What paver pattern works best for a modern home?

Stacked bond suits modern and minimalist architecture. The aligned joints read as clean and deliberate. Pair it with large-format pavers in a light gray or charcoal tone for a sharp, contemporary look. Avoid stacked bond on driveways due to structural limitations.